Start with what the Behir pack actually gives you
The Nolzur's Marvelous Miniatures Behir is a single-monster pack: one Behir miniature, no scenery or extra figures. That matters for prep because you are not sorting a sprue of options or deciding which pose to build. You are working with one large creature, and your job is to get it clean, stable, and ready for paint.
The record also notes little to no assembly required. In practice, that means you should not expect a full build project. Check the figure when it arrives, confirm the parts are seated as shipped, and focus your effort on the surface and the base rather than on construction.
What the catalog confirms
- D&D Nolzur's Marvelous Miniatures - Behir: This is a 1-count monster pack which includes 1 Behir miniature. You know immediately that there are no alternate poses or extra figures to assemble, so prep time goes to the surface and base.

D&D Nolzur's Marvelous Miniatures - Behir - D&D Nolzur's Marvelous Miniatures - Behir: Dungeons & Dragons Nolzur's Marvelous Miniatures come with highly detailed figures, primed and ready to paint out of the box. The miniature arrives with a primer coat, so your first decision is whether to paint over it or add another primer layer.
- D&D Nolzur's Marvelous Miniatures - Behir: These fantastic miniatures include deep cuts for easier painting. Deep cuts help you reach recessed detail with a brush, but they also collect dust and mold release, so clean them before painting.
- D&D Nolzur's Marvelous Miniatures - Behir: Little to no assembly required. You can skip a full build sequence and spend your time on inspection, cleaning, and base work instead.
A prep sequence for a pre-primed large miniature
The order below follows the supplied product facts. Where the record does not specify a product, technique, or timing, treat that step as your own choice rather than a manufacturer instruction.
- Inspect the figure and the deep cuts: Look over the Behir for bent parts, visible mold lines, and any debris sitting in the deep cuts. The deep cuts are a design feature for painting, but they are also where dust and residue collect.
- Clean gently before you paint: Wash the miniature in lukewarm water with a mild soap, then rinse and let it dry completely. Avoid hot water, which can soften thin parts. The record does not supply a specific cleaning product or drying time, so use your normal miniature-cleaning routine.
- Decide whether to re-prime: The Behir is already primed, so a second primer coat is optional. If you do add primer, use a thin coat and let it cure fully before painting. The record does not name a primer brand or cure time.
- Plan gap filling only where you see a gap: Because little to no assembly is required, most Behir miniatures should not need gap filling. If you do find a seam or gap, fill it before painting, then touch up the primer over the filled area. The record does not specify a filler product or drying time.
- Base the miniature for stability: A large monster benefits from a stable base. The record does not describe the supplied base or mounting method, so check what is in the pack and use a base that suits your table.
Priming a large miniature: what changes at this size
Priming large miniature is less about a special product and more about control. A large surface shows uneven primer more readily than a small one, so keep coats thin and work in good light. The Behir arrives primed, which means your first coat is already there; if you add another, you are building on that surface rather than starting from bare plastic or metal.
The record notes that some Nolzur's miniatures include translucent parts. The Behir record does not confirm which parts, if any, are translucent. If you find a translucent area on your figure, decide before priming whether you want to keep it clear or paint over it. Once primer covers a translucent part, the effect is gone.
Painting prep decisions the record leaves to you
The supplied information supports the surface and assembly facts above, but it does not prescribe a paint line, brush size, or color scheme. These are your calls.
- Paint straight onto the factory primer or add a base coat: The miniature is primed and ready to paint out of the box. You can start with your colors directly, or add a thin base coat if you want a different starting tone. The record does not recommend one approach over the other.
- Use the deep cuts to your advantage: The deep cuts are there for easier painting. Load your brush lightly and let the recesses hold shadow rather than flooding them with paint.
- Handle the miniature carefully between sessions: The record does not include a protective finish or varnish instruction. If you plan to use the Behir in play, choose a protective coat that suits your paint and climate, and test it on a small area first.
Packaging, printings, and what to check on arrival
The packaging displays the miniature in a clear and visible format, so you can see what you are getting before you open it. The record also warns that due to multiple printings, you may receive packaging different from what is pictured. That is a packaging variation, not a different miniature, but it is worth knowing if you are buying for a specific box.
When your Behir arrives, confirm the single miniature is present and undamaged, and check the deep cuts for any packing debris. If you find a gap or a bent part, address it before you start painting rather than after.


